xerox cartridge chip resetter
If you have got refilled your toner cartridge and your printer doesn't appear to acknowledge it as new, then you'll have to reset toner cartridge. whether or not you have got intercalary more toner, your printer can still scan it at the identical low toner level that is sort of empty.
The lifetime of a toner cartridge is set by the reset chip on the cartridge. throughout the printing, the fill level hold on on the chip is reduced steady. Once the fill level has reached zero, the chip has invalid. By replacement the chip with a replacement one, the cartridge is recognized as new/full once more by the printer. The toner/reset chip should get replaced once the printer shows the message "toner empty / replace toner". The chip ought to solely get replaced once the cartridge has been refilled.
We expressly advise against replacement of the chip while not filling of the cartridge, as this solely works in exceptional cases and also the full print capability of the chip isn't used. every toner chip will solely been used once and is unusable later on, because the fill level data hold on on the chip will solely be reduced and not inflated once more.
It becomes terribly frustrating once you load your printer with new toner cartridge, and it remains at the identical mark. It doesn't solely stop you from printing, however it can even take lots of your time and frustration if you don’t grasp what to try to to. sadly, this is often however most printers work, and you're needed to require some further steps to understand the way to reset toner cartridge.
The following could be a procedure that may work around however your printer reads cartridges. it'll delete the preserved memory from the previous cartridge thus it will scan the new one. The procedure can facilitate your in resetting it.
Xerox 3010,3040,WC-3045
Xerox 3140,3155,3160
Xerox 3150
Xerox 3200
0 Commentaires